Everything about Blinds For Your Windows

Window blinds are necessary for anybody who wishes to protect their personal privacy, at home or in the workplace. While it holds true that some individuals prefer to use curtains, window blinds have the advantage because you get to manage the quantity of light that is available in. One factor for the option of drapes over blinds is the ease of installation. Some kinds of window blinds are, in fact, a bit more difficult to set up Ö but this alone shouldn’t be the choosing aspect. Blinds can add a touch of the exotic, or the elegant, to any space.

There are some elements to consider when finding out what kind of blinds to purchase.

The very first element is the design of the window blinds. The most popular are the Venetian blinds, which have actually horizontal sections made of wood or metal. These panels can vary in width from 16 to 50 mm. There are, obviously, several types of window blinds. Here are a few of the more widely known varieties.

In contrast to Venetian blinds, vertical blinds are aptly named given that they have vertical panels. These sections can be completely separated if you wish to have the appearance of natural sunlight. Vertical window blinds are not restricted to wood and metal, but can be made from several materials.

Roller blinds normally include a total sheet material, such as vinyl. These blinds roll up or down and can completely obstruct sunlight. If you can’t envision this, think of those old Tom and Jerry animations. You know, the ones where Tom gets wrapped up in the window blinds? Those are roller blinds.

Honeycomb blinds look like, well, honeycombs. The result is produced through layering nontransparent fabric. An unique quality of these window blinds is that their layering allows them to insulate the space by not letting heat or cold in.

There are the decorative wood woven tones. These blinds are generally made from interwoven bamboo and don’t have an actual adjustment. They are best used in circumstances where you would like your blinds to obstruct direct sunlight from being available in, but you would still like to have a little natural light.

When hanging your window blinds, you need to remember to leave enough space so that they can hang easily when extended. The terrific feature of modernisation is that you don’t actually need to hang your blinds yourself. Many of the home furnishing stores will install the window blinds for you, often at a really low cost. If you are not sure that you can install your window blinds yourself, the best thing is to employ an expert.

Post Sponsored by http://plumbersinhitchin.co.uk

Plumbing leaks

Plumbing leaks are really bad and can cause so much damage to your home, sometime they are not spotted until its too late. And they can cause untold damage to rugs, carpets, flooring, walls, furniture, in fact absolutely everything can feel the effects of water damage.
So here are some tips to prevent water leaks and some ideas on what to do if they happen. The worst time is in winter when it gets below freezing. Here are some tips to help.
Basically when any stress get applied to your plumbing, leaks can occur and winter is great for that or rather bad for that. So the tips coming up are our top tips based on years of our very learned experience.
  • Pipes must be protected

Water freezes quite quickly when temperatures drop and as water expands when it freezes, it has enormous strength and finds the weakest part of your pipes and the pipes literally burst at the seams. Causing a flood of massive proportions or a small flood which can go undetected for days and causing terrible damage to floors, walls, carpets, rugs, furniture.

To alleviate this issue, your pipes must be insulated, every pipe must be insulated and a foam insulation works a treat. Easily bought from your local shop or store. It is simple to apply, just cut it to length, open it up and push it over and secure it with tape.

  • Fix leaks now

It is always better to get leaks fixed as soon as you see them, if you wait then it is usually a bit of a disaster. Check all rooms with water, kitchen, bathroom, utility room for any drips, wetness, anything that may resemble water. And anything you may see, fix straight away or get a plumber in.

  • Hot water heater drainage 

If hard water is an issue in your area, you really need to drain your tank as rust will grow and get into your water system and be there in drinking and bathing water. Look to have it checked out now before it causes an issue.

  • That outdoor hose, pack it away

Any garden hoses, have to go away, if they are left out and freeze, they will expand into the house if connected and blow the seams off of your pipes. So, this is an easy one, disconnect it now. And reconnect when the weather warms up.

  • All shut-off valves leading outdoors need to be drained

Close off all valves connected to outdoors and drain them now. If there is any water left in them, it will freeze and cause damage for sure.

  • The sump pump and area it sits in

Again this needs to be inspected and cleaned out, when it gets cold the pump may freeze ad damage itself. So inspect it now and sort out any issues before it is too late.

These tips will help you stay flood free over the winter and if you do get a flood, then the problem is bad, because your floors, carpets, rugs, walls and furniture gets ruined so fast. Our next tip is if you do get a flood, call out a professional cleaning company quickly, they have the right equipment to clear up the water and dry it out as that is what the do.

 

DIY plumbing tips

   diy lady plumber

Welcome to Problems related to baths and their solutions.

If cleaning is what you are searching for, I think you have found a wrong search. We will however offer clear explanations about bath issues and attempt to enlighten you on the solutions. The above image gives a clear view of a bath issue, which happens to be a common water spill regarding the bath. However, there are quite a number of factors why baths spill. Some are briefly talked on below. Your questions will be attempted in the paragraphs below

Recurring Questions on Bath issues & solutions

I always find water spilling through my roof immediately after bath usage. What can I do about this?

Over the years, this has been the major problem that makes a lot of bath users seek for a plumber, so don’t think you are the only one who has this bath problem. In the event that you notice water getting through the roof soon after utilizing the bath, consult a plumber. But most times, it isn’t much of a severe problem which often sees the inhabitants using the bath soon after the leakage is detected. Most often, the water is leaving the fitting because of a slight looseness of the trap and may barely require a little effort to make it tight again, which often makes the presence of the plumber almost irrelevant. Nevertheless, it is wise to attempt a critical look at the waste to be able to detect the initial reason for the spill.

The silicone which is around the bath easily goes mouldy. How can I stop that?

There are various reasons for the silicone to have gone mould. The major reason is the less expensive nature of the silicone. A silicone not cleaned or not properly cleaned could be another reason. Chances are, the silicone may not be the reason for the mould, but rather, the soap utilized could also be a cause. This is a great article to peruse, on splitting silicone.

Anytime water gets to the overflow level, the bath spills. Could that be an overflow problem?

When you notice leakages when filling your bath beyond the overflow level, then chances are, the overflow is wrongly fitted. There ought not to be leakage of water if there be an overflow situation. To rectify this problem, the overflow plug has to be removed, properly cleaned, then re-siliconed. However, the most appropriate silicone best in this situation is one that can be submerged.

When my bath is filled up, I observe the water draining gradually. What could be the reason?

Your bath drains slowly even when the drain is blocked because the plug is wrongly fitted or there is a bad seal between the in-between the bath and the fitting. To resolve this issue, you will have to remove the waste and do a re-sealing.

I observed the bath chain breaks always. How do I get a good chain to stop this?

Some chains bought from DIY stores are less expensive, and could easily break, especially when carelessly handled. It is best to acquire one that can withstand hard use or wear, which can be ordered from online or could be bought at some real good DIY plumber stores.

Anytime I try to empty the bath, it takes a relatively long time for it to completely get drained. What can I do about this?

If the bath takes a relatively long time to get emptied, then it is most likely that the outlet is filled with hairs which have reduced the outflow of water. Other things could cause this, but here we are dwelling on bath issues and solutions, hence we would love to concentrate on bath related matters. In some instances where your waste refuses to flow normally, then there might be substances in the waste that has obstructed flow of water. It is therefore needful to check and be sure your outlet has a full or at least 1½ inches to enable free-flow of water. Then, it would be wise to use an unblocked sink called buster. Other exceptionally solid products like One Shot would be very okay. However, one must carefully and strictly adhere to the manufacturer’s instruction because of the high-level risk associated with it.

At the point where the bath gets full, there is always an open space between the bath and the silicone. What could be the cause?

In the event that you discover a gap, and the tile gets too expansive and the silicone seeming to part, then it is on account of the bath not been properly installed. Here, be possible to correct this until the bath is completely removed. To solve this problem, you may have need for a supporting wood to bore in the wall, then you prop up the bath as much as is needed. The wood kept beneath the bath edges is what will support the bath. When this is done, it is best to make some adjustments to the legs beneath the bath as would make the bath well balanced.

I noticed my bath has discoloration. How can I deal with this bath issue?

In the event that you observe an exceptionally grimy bath and not able to remove the stains, you would be amazed on how baking powder could restore the color of your bath. Do make use of Baking powder-it works magic on your bath

My bath has a rust spot. How can I remove this?

If it happens that rust spots are found in your bath, it is very important and most timely to quickly consult a bath specialist who will get out the rust-grinds it off and thereafter considers a re-paint. In other cases, however, when such a problem of rust on the bath becomes severe, the specialist may not be able to do much, except that the bath is replaced.

And if you are not sure please contact a professional plumber, there are a lot around, here is a good one in St Albans.

We have some great videos to show you some DIY tips here.